Product Description
- Heavy duty chrome finish train air horns
- 145 PSI Air System
- All-inclusive train horn kit
- Chrome plated brass
- Max honk time: 6 seconds
- Recharge from 110-150 PSI in only 80 seconds
- Part Number: HK-C3M-228H
- Horn: Marine outlaw chrome train horn
- Horn Length: 18.5″ (469.9 mm)
- Horn Width: 15.5″ (393.7 mm)
- Horn Height: 12.5″ (317.5 mm)
- Horn Weight: 15 lb (6.8 Kg)
- Horn Fitting: 1/2" Tube
- Air Source Unit: HornBlasters 228H
- Operating Pressure: 145 PSI
- Air Source Length: 18.9″ (480.6 mm)
- Air Source Width: 5.9″ (149.86 mm)
- Air Source Height: 13.7″ (347.98 mm)
- Air Source Weight: 17.15 lb (7.78 Kg)
- Air Source Kit Tank: 2.0 gallon 5 port tank
- Volume: 2 Gal (8.8 L)
- Air Source Kit Compressor: 280C air compressor
- Voltage: 12 volts DC
- Max Amperage: 19 amps
- Maximum Duty Cycle: 30% @ 100 PSI
The Outlaw XL 2 gallon kit comes equipped with the newest version of our hugely popular Outlaw horn. A 2 gallon air source unit is also included which has everything you need in one package to install this bad boy in your truck.
What's different about the Outlaw XL?
- Brilliant durable solid brass with a triple chromed finish
- Comes with a pre installed chrome air valve
- Bigger and louder than the standard Outlaw horn
- Most of the kit is already pre plumbed and pre wired for easy install
(Note: Tank mounted air compressors are not fully sealed. For this reason, the manufacturer recommends the tank/compressor system be mounted in the upright position in an enclosed space away from moisture, dirt, debris, etc... Failure to mount this product as directed will void the warranty)
**Detaching the compressor from the tank will void your warranty on this kit. If you need a solution where the compressor is detached, please look at our 232 and higher models. **
- Outlaw XL 2 gallon train horn kit
- HornBlasters 228H Air Source Unit
- 10ft of 1/2" air line
- Complete wiring kit
- Complete fitting kit
- 110-145 PSI pressure switch
- Mounting hardware
- Earplugs
- Detailed instructions
HEARING PROTECTION REQUIRED
This product produces extreme loudness. Proper hearing protection must be worn at all times during its operation. Hearing loss or permanent damage may result from unsafe use. Use this product in a safe and responsible manner and at a distance of at least 100 meters from others. Never operate this product in a closed environment, in close proximity to living beings, or where prohibited by law.
